Documents / Assemble Adaptor Foot Valve

Assemble the adaptor foot valve

The adaptor foot valve can be fitted to the bottom of the cylinder to accommodate a submersible pump or extension pipes.


Secure the cylinder

Secure the cylinder and remove the nuts and bolts.


Remove foot valve

Very important! Remove the foot valve from the cylinder.


Fit the adaptor

Fit the adaptor into the opening of the cylinder and tap the adaptor in with a hammer and a block of wood until the shoulder of the adaptor is flush with the bottom of the cylinder.


Drill pilot holes

Drill 4mm pilot holes 12mm deep through the cylinder tube holes into the adaptor.


Fasten self-tapping screws

Fasten the self-tapping screws provided with the adaptor.